10
| INSTRUCTIONS FOR USE
OMD 202RS
INSTRUMENT SETTING
Setting and controlling the instrument is performed by means of the Remote control. With the aid of the Remote control it is
possible to browse through the operation menu and to select and set the required values.
Symbols used in the instructions
DEF
values preset from manufacture
4
2
symbol indicates a flashing light (symbol)
MIN
inverted triangle indicates the item that can be placed in USER menu
LIM. L.1
broken line indicates a dynamic item, i.e. it is displayed only in particular selection/version
after pressing the key the set value will not be stored
after pressing the key the set value will be stored
30
continues on page 30
Setting the decimal point and the minus sign
DECIMAL POINT
Its selection in the menu, upon modification of the number to be adjusted it is performed by the control key
with transition
beyond the highest decade, when the decimal point starts flashing. Positioning is performed by
/
.
THE MINUS SIGN
Setting the minus sign is performed by the key
on higher decade. When editing the item substraction must be made from the
current number (e.g..: 013 >
, on class 100 > -87)
the last two places may display
measuring units
A
1
4
3
2
Data communications
(orange LED)
Measured value
(red/green/orange LED)
Ralay status
(red LED)
ON the digit is lit
OFF the digit is not lit
OFF the digit is flashing
limits
with restriction
(hysteresis, delay)
M Min/max.
value
- upper LED
T Tare
- bottom LED
Function
(green LED)
IR remote control
4.