Orbit Merret OM 402PID Manual Download Page 84

Page: 84 / 100

| INSTRUCTIONS FOR USE

OM 402PID

SETTING

PROFI

6.5

SETTING “PROFI” - PROGRAM

6.5.1

PROGRAM LAUNCH

CHANNE.

PROG.

OUTPUT.

PROG. 1

PROG. 3

PROG. 4

INPUTS

PROG. 5

PROG. 2

PROG.14.

SERVIC.

In this menu, programs for PID control are
set. It is possible to set up to 14 different
programs, each of which can have 64 steps.
Programs can be stringed together.

PROG. -

Program for controlling of
the set value

CHANNE.

PROG.

OUTPUT.

PROG. 1

PROG. 3

PROG. 4

INPUTS

PROG. 5

PROG. 2

PROG.14.

SERVIC.

OFF

WEEKLY

LEFT

TIME

DEF

DAY 1

STR. 1

DAT. 1

TIM. 1

PGM. 1

EXT. 2

EXT. 1

ENTER

DOWN

EXT. 3

STR. 1

Program launch

OFF

Launch is disabled

- program can be launched by the instrument’s

front push button
(selection

PROG

. see chapter 6.1.5a)

TIME

Launch at a preset time

- program will be launched when date (“

DAT. 1

”)

and time (“

TIM. 1

“) is reached.

WEEKLY

Launch at a preset day
and time

- program will be launched when date (“

DAY. 1

”)

and time (“

TIM. 1

”) is reached

- (

D.1

- Monday, …,

D.7

- Sunday)

LEFT

Program launch by an
assigned push button

- this setting is identical for all push button

(Enter, Down, Left, Enter)

EXT. -

Program launch activated by
an external contact closure

- this setting is identical for all external inputs

(1…3)

If another function is assigned to either a front
panel button or the external input, it will also
be executed (chapter 6.1.5a/6.1.4a)

Summary of Contents for OM 402PID





































































































Search results

Summary of Contents for OM 402PID

Reviews:

Related manuals for OM 402PID

Brands by name

Popular brands

Orbit Merret OM 402PID, Manual

Search results

Summary of Contents for OM 402PID

Reviews:

Related manuals for OM 402PID

Brands by name

Popular brands