2-2
INSTALLATION — STREAMING ENCODER
ORBAN MODEL
•
Installing the Opticodec-PC encoder software on to the computer
•
Optionally connecting Optimod-PC’s inputs and outputs
When you have finished installing Opticodec-PC, proceed to Configuring Opticodec-
PC on page 2-3.
1.
Install Optimod-PC in your computer.
[Skip this step if you are installing an Opticodec-PC LE and are using a sound card
other than Optimod-PC.]
For instructions on installing Optimod-PC, refer to the separate Operating Man-
ual for Optimod-PC.
If you are using a sound card other than Optimod-PC, be sure that this sound
card is installed and has been verified to operate correctly in Windows.
2.
Unpack and inspect.
A)
If you note obvious physical damage, contact the carrier immediately to make
a damage claim. Included in the package are:
1 Operating
Manual
1 Software
CD-ROM.
B)
Save all packing materials! If you should ever have to ship Opticodec-PC, it is
best to ship it in the original carton with its packing materials because both
the carton and packing material have been carefully designed to protect the
manual and CD from damage.
C)
Complete the Registration Card and return it to Orban. (please)
The Registration Card enables us to inform you of new applications, per-
formance improvements, software updates, and service aids that may be
developed, and it helps us respond promptly to claims under warranty
without our having to request a copy of your original invoice or other
proof of purchase. Please fill in the Registration Card and send it to us
today. (The Registration Card is located after the cover page).
We do not sell our customer’s names to anyone.
3.
Run the installer.
A)
Insert the Opticodec-PC installation CD into your computer’s CD drive. The
setup program will usually start up automatically.
Opticodec-PC will run only on Microsoft Windows 2000 (SP3 or higher),
XP, and Server 2003. It will not run on earlier Windows versions, includ-
ing 95, 98, 98SE, ME, and NT.
B)
If the setup program does not start up:
a)
Navigate to
S
TART
\R
UN
on your computer.
b)
In the Run dialog box, type
x:setup
, where “x” is the drive letter of your
CD-ROM drive.
