![Orban OPTICODEC-PC 1010 Technical Manual Download Page 43](http://html1.mh-extra.com/html/orban/opticodec-pc-1010/opticodec-pc-1010_technical-manual_1647020043.webp)
OPTICODEC-PC
INSTALLATION — STREAMING ENCODER
2-1
Section 2
Installation — Streaming Encoder
Installing Opticodec-PC
Opticodec-PC PE
For the PE version of Opticodec-PC, one Optimod-PC 1100 PCI Audio Card is required
per audio program source. In a given computer, you can use as many cards as there
are available PCI slots (including slots in an external PCI expansion chassis).
Multiple encoder instances (including encoders other than Opticodec-PC) can oper-
ate simultaneously to generate multiple bitrates and/or stream formats from the
same program source. You may create unlimited numbers Opticodec-PC PE in-
stances, constrained only by CPU resources. Multiple encoder instances require
multi-client driver operation. Windows XP supports multi-client audio driver opera-
tion directly, while Windows 2000 requires an audio bridge application such as
Ntonyx Virtual Audio Cable (
http://www.ntonyx.com
).
Each Opticodec-PC PE application is serialized to match the Optimod-PC card with
which it will be used. It cannot be used with another Optimod-PC card. For each Op-
timod-PC card in a given computer, one Opticodec-PC PE application must be in-
stalled. An Opticodec-PC PE application may be moved to any computer provided its
mating Optimod-PC is moved with it to the same computer.
Opticodec-PC LE
Opticodec-PC LE will operate with any quality Microsoft Windows qualified sound
device. If physical audio inputs are not required (for example, by sourcing audio
with a player on the same computer as the encoder) it is possible to use a virtual au-
dio driver program, such as Ntonyx Virtual Audio Cable (
http://www.ntonyx.com
) to
feed Opticodec-PC LE. In this way, sound device hardware, whether installed in a PCI
slot or on main board, is available for other uses, such as monitoring a stream.
Only one encoder instance of Opticodec-PC LE will operate on a single computer.
Software Installation
Installation consists of:
•
Installing Optimod-PC (if you are using Opticodec-PC PE, which requires the
presence of Optimod-PC to start up)
•
Unpacking Opticodec-PC