Oracle X7-2L Service Manual Download Page 282

Page: 282 / 308

Monitoring System Components

Guide for Configuration and Maintenance Firmware Release 4.0.x

in the Oracle Integrated

Lights Out Manager (ILOM) 4.0 Documentation Library at

http://www.oracle.com/goto/

ilom/docs

Monitoring System Components

The tables in this section identify the system components and describe the naming conventions

applied to the components of Oracle Server X7-2L.

Each section corresponds to an IPMI entity ID and lists sensors, indicators, and field-

replaceable units (FRUs) related to that entity. The tables contain the following fields:

■

Component Name

– Shows the user-visible component name used in management

interfaces to refer to a specific sensor, indicator, or FRU. The IPMI name is a shortened

form of the component name, and is indicated by the

boldface

portion of the component

name.

■

IPMI Type

– Indicates the type of sensor, indicator, or FRU represented.

■

Description

– Describes the particular component name reference.

■

Values

– Defines the states of the sensor, indicator, or FRU entity, and any specific units or

values that are expected, if applicable.

Note -

Some component names are hidden in the Oracle ILOM user interfaces. Further, as of

Oracle ILOM 3.1, the Oracle ILOM 3.0 legacy targets

/SYS

and

/STORAGE

have been replaced

/System

. Even though these legacy targets might be hidden, you can still use them to issue

commands. For information on legacy targets, see the ILOM 3.1 Documentation Library at

http://www.oracle.com/goto/ilom/docs

This section includes information for the following server components:

■

“System Chassis Components” on page 283

■

“Cooling Unit Components” on page 285

■

“Disk Backplane Components” on page 285

■

“Memory Device Components” on page 287

■

“Power Unit Components” on page 287

■

“Processor Components” on page 288

■

“System Motherboard Components” on page 289

■

“System Firmware Components” on page 291

282

Oracle Server X7-2L Service Manual • October 2017

Summary of Contents for X7-2L





















































































































































































































































































































Search results

Summary of Contents for X7-2L

Reviews:

Related manuals for X7-2L

Brands by name

Popular brands

Oracle X7-2L, Service Manual

Search results

Summary of Contents for X7-2L

Reviews:

Related manuals for X7-2L

Brands by name

Popular brands