Oracle Netra Server X3-2, Installation Manual

Page: 94 / 126

86 Netra Server X3-2 Installation Guide • May 2013
USB Ports
You can access two USB ports from the front of the server and two USB ports from
the rear of the server. The USB ports support hot-plugging. You can connect and
disconnect USB cables and peripheral devices while the server is running, without
affecting server operations.
Note –
The maximum USB cable length for connecting to the server’s full-speed USB
ports is 5 meters.
Note – You can connect up to 126 devices to each of the four USB controllers (two
ports in front, two ports in rear), for a total of 504 USB devices per server.
Related Information
■
“Available Connections” on page 78
■
“Rear Panel Components (Installation)” on page 7
■
“SER MGT Port” on page 83
■
“NET MGT Port” on page 84
■
“Gigabit Ethernet Ports” on page 84
■
“Video Port” on page 86
■
“Alarm Port” on page 88
Video Port
The server has one 15-pin VGA video port on the rear of the server. Use a HDB-15
video cable to connect to a video device. You can also use an RJ-45 to DB-25
analog-to-digital video adapter to achieve the required connection.
Pin Signal Description Pin Signal Description
1 +5V supply 3 Data +
2 Data - 4 Ground