Oracle Netra Server X3-2, Installation Manual

Page: 69 / 126

Installing the Server in a 2-Post Rack 61
Related Information
■
“Install a Server (2-Post, 19-Inch Sliding-Rail Kit)” on page 61
■
“Tools Needed for Installation” on page 22
■
“Handling Precautions” on page 20
■
“Rack Cautions” on page 23
▼
Install a Server (2-Post, 19-Inch Sliding-Rail Kit)
Note – The 19-inch, 2-post sliding rail mount kit supports rack web thicknesses (the
width of the rack post) of 3 in. (76.20 mm), 4 in. (101.6 mm), and 5 in. (127 mm).
Note –
The front-to-back rail spacing must be at least 15.43 in. (392 mm) and not
more than 34 in. (863.6 mm) from the outside face of the front rail to the outside face
of the back rail.
1. Gather the required tools.
See “Tools Needed for Installation” on page 22 .
2. Read the server cautions.
See “Handling Precautions” on page 20 and “ESD Precautions” on page 21 .
3. Read the rack cautions and stabilize the rack.
See “Rack Cautions” on page 23 and “Stabilize the Rack” on page 24 .
TABLE:
19-Inch Sliding-Rail Screws
Quantity Description Where Used
10 M4 x 0.5 mm x 5 mm Phillips panhead screws 8 for glides, 2 extra
10 M5 x 12.7 mm screws 10 for rack, if appropriate
12 M6 x 13 mm screws 10 for rack, 2 extra
9 M6 square clip nuts 9 for rack, if appropriate
10 10–32 collar screws, 4 short, 4 long, 2 extra 8 for racks with 10-32 holes, if appropriate
12 10–32 x 0.5 in. combo head screws 12 for rack, if appropriate
12 12–24 x 0.5 in. combo head screws 12 for rack, if appropriate