Acme Packet 6100 Hardware Installation Guide
67
power supply, remember to first ground yourself using appropriate ESD
grounding equipment such as a wrist strap.
Figure 6 - 90. ESD Grounding Strap
To remove a power supply from the Acme Packet 6100 chassis:
1.
Remove the AC or DC power cables from the power supplies.
Figure 6 - 91. Removing the Power Cords
2.
With your thumb, push the grey locking tab to the left to unlock the power
supply from the chassis.
USB
Alarm
Console
System
Power
On
Stby
Stby
Dis
Figure 6 - 92. Releasing the Locking Tab
3.
Holding the handle, pull the power supply towards you. This will
disengage the power supply from the midplane and the chassis.
Summary of Contents for Acme Packet 6100
