76
Acme Packet 6100 Hardware Installation Guide
4.
Pull the loosened NIU out of the Acme Packet 6100 by holding each side of
the NIU’s front panel.
Figure 6 - 110. Removing the NIU
5.
Place the NIU in an antistatic bag while it remains outside of the Acme
Packet 6100.
NIU Replacement
To install an NIU into the Acme Packet 6100 chassis:
1.
Locate the NIU.
2.
Ensure that the ejection levers on the front of the card are in the open and
extended position.
Figure 6 - 111. Extending the NIU Ejection Levers
3.
Hold the NIU by its sides with the front panel bezel facing you.
Summary of Contents for Acme Packet 6100
