Oracle Acme Packet 6100, Hardware Installation Manual

Page: 91 / 114

Acme Packet 6100 Hardware Installation Guide 83
4. Reconnect the optical cables to their corresponding ports.
Figure 6 - 126. Reconnecting Optical Cables
Alarms
The Acme Packet 6100 polls its hardware components to ensure they are
functioning properly. If it encounters a fault condition, it will report alarms in
these categories:
• Hardware temperature
•
Fan speed
• Environmental sensor
•
Power supply
• Voltage
•
Physical interface cards
Each alarm is assigned a severity level, depending on the details of the fault.
Table 6 - 8. Descriptions of Alarm Severity Levels
Alarm Severity Description
Minor Functionality is impaired to a small degree (e.g., a single fan has failed)
Major Pending failures or unexpected events are imminent (e.g., an LOS)
Critical Catastrophic condition has occurred (e.g., the system is overheating)
Hardware and
Environmental
Alarms
This section provides details about hardware and environmental alarms.
Hardware
Temperature Alarm The following table lists the hardware temperature alarm.