3. Put the basic plate (3) into the heating slot.
4. Insert the base and the channel under
the heating slot.
Hot stamping
1. Put a cut off piece of foil in the place
where you want to make hot stamps.
2. Insert the cover under the heating slot.
Make sure that the foil strip is positioned
exactly under the frame.
3. Press the arm of the machine maximally
down until the counter starts to count
down the time
4. After the set time passes (inscription
END appears) lift the arm.
Note!
If the current heater temperature is too low – an
inscription LO appears. It is necessary then
wait the heater to get hot.
If the current heater temperature is too high –
an inscription HI appears. You need to wait until
the heater cools down.
5.Take the cover (channel) out and remove
the foil strip.
To change an inscription or a matrix,
remove the frame from the heating slot
(note: the frame is hot)
, put it away on the
holder,
wait 5÷10 minutes
until the frame
is cold and, subsequently, start composing
a new text or mounting a new matrix.
Note!
After hot stamping is done, we recommend to wipe
the hot stamped inscription with a soft cloth (in
order to get rid of the remainings of hot
stamping foil).
Maintenance:
The machine needs neither lubrication nor
perio-dical surveys. The points to be lubri-
cated have been preserved in the factory.
The machine housing is coated with pow-
der varnish. The machine can be cleaned
with detergents commonly available in the
market. Do not use any solvents!
Technical data:
Rated voltage: .................................. 230V 50 Hz
Max power consumption: .......................... 500W
Rated power consumption: ........................ 80W
Dimensions DxSxW (in.): .............. 546x362x278
Operating temperature: .......................... ~100°C
Temperature adjustment range: ........ 50-150°C
Temperature stabilization: ........ microprocessor
Maximum cover width (with the side stop): ...... 265mm
Maximum cover width (without the side stop): 305mm
Technical data: (
North America)
Rated voltage: .................... 110-120V 50-60 Hz
Max power consumption: .......................... 250W
Rated power consumption: ........................ 50W
Dimensions DxSxW (in.): .......... 21,5x14,2x10,9
Operating temperature: ............................ ~212F
Temperature adjustment range: ........ 122÷302F
Temperature stabilization: ........ microprocessor
Maximum cover width (with the side stop): ........ 10,4 in
Maximum cover width (without the side stop): ...... 12 in
