Optoma A16, Installation Instructions Manual

Page: 15 / 21

14
5. Repeat steps 1 - 4 to balance center and corner resolution.
Attaching the lens supporter to the UST lens
After image adjustment is completed, attach the lens supporter to the UST lens.
Follow the steps below to complete the processes.
1. Attach lens mount bracket to the bracket.
2. Fasten the two M3 X L8 hex screws using the 2.5 mm allen key without
putting excessive force on the UST lens, bracket and lens supporter.
3. Fasten the M3 X L8 hex screws fully using the 2.5 mm allen key to connect
the bracket and lens supporter in to the final position.
Note : To avoid affecting the projected image, do not use any force whilst
fastening the screws.
Removing the UST lens
Follow the steps below to remove the UST lens.
1. Press the lens release button.
2. Rotate the lens counter-clockwise by a quarter and release the UST lens.
A
C
B
2
1
4
5
7
5
6
5
3
8
5
9
5