Optoma A16, Installation Instructions Manual

Page: 7 / 21

6
Installing UST lens boresight module
To install UST lens boresight module, complete the following steps.
1. Remove 3 screws with a Philips #2 screwdriver from the non-UST lens
boresight module.
2. Release the non-UST lens boresight module from projector.
1. Release the lens cable from the original holder on the plate.
2. Install the UST lens boresight module into the projector.
The boresight module needs to be adjusted before fitting to the unit.
See Boresight pre-adjustment .