Optoma A16, Installation Instructions Manual

Page: 10 / 21

9
5. Attach the lens supporter to the bottom of the projector.
6. To fasten the lens supporter on to the mounting holes use 5 mm allen key
with 2 M6 x L22 hex screws and 2 M6-6.7 x 1 x 16 washers.
Installing ceiling mount with lens supporter
To install this lens in ceiling mount, complete the following steps.
Note: Due to thermal requirement, user needs to keep at least 30mm between the
ceiling mount plate and bottom intake. Furthermore, user would need to prepare
adapter A, adapter B, M6 ceiling mount screws and ceiling mount plate that are not
included in the package list.
Lens supporter
M6-6.7 x 1 x 16 washers
M6 X L22 hex screws
bracket
M3-3.7 x 0.8 x 18 washer
M3 X L8 hex screw