Optoma A16 Installation Instructions Manual Download Page 2

Page: 2 / 21

Content

Projector system requirement ...................................................................... 2

Required accessories and tools ................................................................... 2

Entering UST mode for installation setup ................................................... 4

Removing the non-UST lens ......................................................................... 4

Boresight pre-adjustment ............................................................................. 4

Installing UST lens boresight module .......................................................... 6

Installing the lens supporter ......................................................................... 7

Installing ceiling mount with lens supporter ............................................... 9

Installing the UST lens ................................................................................ 11

Turning the projector on.............................................................................. 12

Image adjustment ........................................................................................ 12

Lens focus adjustment ......................................................................... 12

Boresight adjustment ........................................................................... 13

Attaching the lens supporter to the UST lens ........................................... 14

Removing the UST lens ............................................................................... 14

Change back to the non-UST lens after using the UST lens .................... 15

Releasing the UST lens boresight module ................................................ 15

Summary of Contents for A16






















Search results

Summary of Contents for A16

Reviews:

Related manuals for A16

Brands by name

Popular brands

Optoma A16, Installation Instructions Manual

Search results

Summary of Contents for A16

Reviews:

Related manuals for A16

Brands by name

Popular brands