Optoma A16, Installation Instructions Manual

Page: 14 / 21

13
1. Adjust back focus length to make the area of point 5 clear and sharp.
2. Adjust focus to make screen corners (point 1, 3, 7, and 9) clear and sharp.
3. Repeat step 1 and step 2 on full screen to balance center and corner
resolution.
Boresight adjustment
Note: If further tuning is required, follow the steps below. Otherwise, move to the next
section.
To complete fine tuning of the image, adjust the boresight gears using the L shape tool.
Make sure that the boresight extenders are installed.
1. Adjust boresight gear B using the L shape tool to focus screen point 4 and 7.
2. Adjust boresight gear C using the L shape tool to focus screen point 6 and 9.
3. Adjust Zoom/Focus to make screen point 1 to 3 clear.
4. Adjust boresight gear A using the L shape tool to make screen point 8 visible.
2
1
4
5
7
5
6
5
3
8
5
9
5