CHAPTER 2: QUICK START
SNAP PAC S-Series User’s Guide
29
29
DIN-Rail Mounting and Dimensions
DIN-rail mounting requires an adapter clip, part number
SNAP-PSDIN (not included).
For DIN-rail mounting, remove the four screws that fasten the
panel mounting base plate to the controller.
Save screws.
Remove the base plate.
Use the four screws to fasten the DIN-rail adapter clip to the
bottom of the controller, as shown.
Antenna dimensions for the SNAP-PAC-S1-W are on
page 26
.
Optional DIN-rail
adapter clip
SNAP-PAC-S1, SNAP-PAC-S1-FM, and SNAP-PAC-S1-W
