CONFIGURING PPP SUPPORT IN MICROSOFT WINDOWS
SNAP PAC S-Series User’s Guide
60
Advanced Tab
Configuring Microsoft Windows Dial-up Networking on
Windows NT
Use the following settings to configure Windows dial-up networking on any PC that will dial in to
the controller.
Click Start and choose Programs
→
Accessories
→
Dial-Up Networking.
Basic Tab
Phone Number—Enter the phone number for the modem attached to the controller. Some cellular
services have a recorded voice message prior to connecting; if so, try appending an @ to the phone
number. It should delay the modem modulation negotiation sequence long enough for the remote
controller to pick up the line.
Server Tab
•
Dial-up server type: PPP: Windows NT, Windows 95 Plus, Internet
•
Network protocols: TCP/IP only
•
Don't enable software compression
•
Don't enable PPP LCP extensions
•
TCP/IP Settings
– Server assigned IP address
– Server assigned name server addresses
