DVR Server Manual ver.5.05/rel.092507
25
the frame rate should be from 1 to 30 fps.
While image size is set ―704*576‖, the frame rate should
be set around 1 to 15 frame.(only for
HC Series
)
【
Remote Image size
】
Select image resolution to be transmitted to clients. When you set the
【
Image Size
】
as 4CIF(704*576), this configuration is not available, the program will select it as CIF
automatically because the DVR board does not support dual stream when it records with 4CIF
resolution. (only for
HC Series
)
【
Image Quality
】
Sets the quality of the image to be recorded. Select from Poorest, Poor,
Medium, Very good and Best.
Click this button to make advanced setup for video quality, you can set I P B frame and
maximum bit rate.
(
Note: If you don‘t familiar with those features, we advise you NOT to revise them
)
Recommend setup:
For CIF:
Image
quality
I frame
value
P frame
value
B frame
value
Max bps
Best
12
12
17
900000
Good
15
15
20
750000
Medium
18
18
23
600000
Low
21
21
26
450000
Lowest
24
24
29
300000
For DCIF:
Max bps = (
Maxbps
/3)*5 Note:
Maxbps
is the CIF‘s value with the same configuration(IPB)
For D1:
Maxbps = (
Maxbps
/3)*8 Note:
Maxbps
is the CIF‘s value with the same configuration(IPB)
【
Alarm Adjust fps
】
Select enable or disable, If you
select ‖enable‖, and an alarm occurs, the
camera will record with real-time frame rate (25fps or 30fps) ,even though
【
Frame Rate(fps)
】
has
been set other values(eg:5fps).
【
Remote Quality
】
Set the image quality of the clients to be recorded from Poorest, Poor,
Medium, Very good and Best.
Click this button to enable users to make advanced setup for video quality of client end,
also can setup I P B frame and adjust maximum bit rate according to the network bandwidth.
.
