User Manual – eSX
OptiPro Systems, LLC.
Page 48 of 111
Last Modified: 8/27/2014
5.
Verify the parameters were entered correctly by observing the graphic representation of the
lens on the screen.
6.
After entering the Lens Blank Parameters, use the probing sequence to set the reception height
automatically.
a.
Secure the blank in the work spindle.
b.
Tap [PROBE] at the bottom of the Lens Blank screen.
Always use caution when using the automated probing sequences.
7.
Tap [OK] to accept the values entered in the Lens Blank Parameter fields and enter the job
HOME screen to begin adding processes to the job, detailed in the sections below.
