User Manual – eSX
OptiPro Systems, LLC.
Page 38 of 111
Last Modified: 8/27/2014
7.5.2
Add, Delete, and Update Library Tools
Selecting a tool type will bring up a screen showing all of the existing tools of that type in the library, and
allow the operator to Add, Delete, or Update tools. To add a new tool of the selected type highlight [Add
New Tool] in the Library Tools list, fill out the fields listed for that tool type, and tap [ADD] to save the
information to the library. An existing library tool can be updated in the specified Tool Type screen by
highlighting a tool from the Library Tools list, modifying the desired parameters, and tapping [UPDATE]
to save the modifications. Finally, tapping [DELETE] will permanently delete the selected tool from the
library. Tapping [CANCEL] returns to the main Tool Library screen, any unsaved changes to the Tool
parameters will be discarded.
7.5.3
Ring Tools
Figure 7-6: Tool Library
–
Ring Tools
Table 7-4: Ring Tool Parameters and Descriptions
Ring Tool Parameters
Description
Name
A descriptive name that differentiates one tool from another.
Description
Additional information that can be used to describe the tool.
Outside Diameter
Measured outside diameter of the tool.
Inside Diameter
Measured inside diameter of the tool.
Lip Radius
Automatically propagated based on OD and ID if the [Round Edge] Function Button is
active, can be manually overridden. This field is inactive if the option [SHARP] is active.
Grit
Grit rating of the abrasive material of the tool.
Shank Diameter
Measured diameter of the shank of the tool.
Ring Height
Overall height of the ring tool, not including the shank, typically measured from the
bottom of the cutting band to the top of the “bell”.
Diamond Height
Height of the abrasive material as measured from the bottom of the cutting band to the
