Optimum ZL-4718, Operating Instructions Manual

Page: 8 / 27

8
INSTRUCTION MANUAL
Steam Iron ZL-4718
Before use, pls kindly read the instruction manual carefully.
Characteristics and structure:
1. handle body
2. heat-insulating plate
3. ceramic soleplate
4. temperature knob
5. indicator lamp
6. power cord bushing
IMPORTANT SAFEGUARDS
1. Please read all instructions carefully before using the
appliance for the first time.
2. Before connecting the appliance, check if the voltage
indicated on the rating plate corresponds with the mains
voltage in your home.
3. Do not use appliance for anything other than intended use.
4. The iron should always be switched off before connecting
or disconnecting from the power supply. Do not pull on the
cord to disconnect the plug from the wall socket.
5. Do not use the iron if it is damaged in any way. Do not
operate the iron with a damaged cord or plug. Do not
replace the power cord or any other parts by yourself-
contact Customer Support for assistance.
6. The iron must not be left unattended while it is connected
to the supply mains.
7. The plug must be removed from the socket-outlet before
the water reservoir is filled with water (for steam irons and
irons incorporating means for spraying water).
8. The iron must be used and rested on a stable surface.
9. When placing the iron on its stand, ensure that the surface
on which the stand is placed is stable.
10. The iron is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking.
11. The appliance is not be used by children or persons with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given
supervision or instruction.
12. Children being supervised not to play with the appliance,
13. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
DRY IRONING
1. Turn the temperature regulating knob to “MIN” position,
turn the steam knob to “0” position, put the socket.
2. Turn the temperature regulating knob to the temperature
scale which the ironed clothes required, the indicator will
light on, then put the iron on the smooth and stable place
vertically.
3. After the indicator goes out, you can begin to iron.
SETTING THE TEMPERATURE
Turn the thermostat dial to the position you require according
to the following markings:
.
• Synthetics/silk(low temperature)
• • Silk wool(medium temperature)
• • • Linen/cotton(high temperature)
The weighty iron in the main body makes the iron heavier, and
this can enhance the ironing effect.
CARE AND CLEANING
1. Turn the Temperature Control Dail to MIN, then
disconnect the iron from the wall outlet and let it cool down
completely.
2. Deposits and other residues on the sole plate can be
removed with a cloth soaked in a vinegar/water solution.
3. The casing may the wiped with a damp cloth and then
polished with a dry one.
4. Never use any abrasives to clean the sole plate.
5. Keep the sole plate smooth; avoid contact with metal
objects.
6. When you have finished ironing or when you are leaving
iron unattended:
- turn the Temperature Control Dail to MIN.
- stand the iron upright.
- disconnect the iron from the wall outlet.
7. Do not allow children to touch the iron or the power cord
when ironing.
UK
1
2
3
4
5
6