Version 1.2.8 - 2020-08-03
29
Translation of original operating manual
MT50
GB
MT
5
0_GB
_4.
fm
5
Operation
5.1
Safety
Commission the milling-machine only under the following conditions:
The milling-machine is in proper working order.
The milling-machine is used as intended.
The operating manual is followed.
All safety devices are installed and activated.
All failures should be eliminated immediately. Stop the milling-machine immediately in the event
of any abnormality in operation and make sure it cannot be started up accidentally or without
authorisation.
Notify the person responsable immediately of any modification.
Safety during operation on page 16
5.2
Control and indicating elements
Img.5-1:
MT50
Control panel
with DPA2000
Machine illumination
Chip and splash guard
Crank handle
Table movement Y axis
Crank handle
Table height adjustment
Z axis
Vertical milling
Panel spindle gear
Star grip for spindle sleeve
feed
Fine adjustment of spindle
sleeve
Clamping lever for spindle
sleeve
Activation of the fine adjust-
ment
Moving the spindle head-
holder (forward or back)
Horizontal spindle
Crank handle
Table movement X axis
Panel feed gear
Gear lever
Feed speed Gear lever
Rapid / STOP / Feed
