Version 1.2.8 - 2020-08-03
35
Translation of original operating manual
MT50
GB
MT
5
0_GB
_4.
fm
INFORMATION
High temperatures are generated at the tip of the tool by the occurring friction heat. The tool
should be cooled during the milling process. Cooling the tool with a suitable cooling lubricant
ensures better working results and a longer edge life of the cutting tool.
INFORMATION
Use a water-soluble and non-pollutant emulsion as a cooling agent. This can be acquired from
authorised distributors.
Make sure that the cooling agent is properly retrieved. Respect the environment when dispos-
ing of any lubricants and coolants. Follow the manufacturer’s disposal instructions.
5.8
Manual spindle sleeve feed
5.8.1
Rough adjustment
Actuate the quill lever in order to manually lift respectively lower the quill.
You can set the spindle sleeve to a given height using the tightening lever.
Tool diameter
[ mm ]
form cutters
Steel
15 - 24 m/min
Grey cast iron
10 - 20 m/min
Cured Al alloy
150 - 250
m/min
Speed [
min
-1
]
4
1194 - 1911
796 - 1592
11937 - 19894
5
955 - 1529
637 - 1274
9549 - 15916
6
796 - 1274
531 - 1062
7958 - 13263
8
597 - 955
398 - 796
5968 - 9947
10
478 - 764
318 - 637
4775 - 7958
12
398 - 637
265 - 531
3979 - 6631
14
341 - 546
227 - 455
3410 - 5684
16
299 - 478
199 - 398
2984 - 4974
