14
Remarks:
.
As for “The pump makes a lot of noise” and “No water will
come out”, you may release some steam out by turning on
coffee/ steam knob for further resolution if the problem is still
not yet solved.
Remember: for further more defects or problems, do not
manage them by yourself, you have to contact the qualified
technicians.
Ecology – Environmental Protection
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste and
should not be disposed of into containers for such waste.
Obsolete or broken-down electrical device
should be
.
delivered to special designated collection points, organized by
local public administration, whose purpose is to collect recy
-
clable electrical equipment.
This way, each household helps reduce possible negative
.
effects influencing natural environment and allows the
.
reclaiming of materials which the product is made of.
Weight: 3,9kg
e
Problem
Possible cause/cause
Resolution
The coffee is not hot enough. The cup and the infusion head are cold.
Pre-heat cups, infusion head and other attachments.
The coffee drops from the side
of infusion head.
The infusion head doesn’t match to its place;
or some powder on the side of infusion head;
or some remaining coffee on the gasket for
infusion head; or the gasket is broken.
Check the infusion head; remove the powder
from infusion head; to clean the gasket with
wetting cloth; You may contact service center
for a new gasket.
The pump makes a lot noise.
No water in tank; or the tank doesn’t match
to its place; or the coffee powder is not fresh,
too dry; or no water in boiler.
Fill the tank with water; to match the tank to its
place; to use the fresh coffee powder; to fill the
boiler with water.
No water will come out.
No water in tank; or the tank doesn’t match
to its place; or the filter carrier is blocked; or
the powder is too fine, pressed on to tightly;
or a scale in machine.
Fill the tank with water; to match the tank to its
place; clean up filter carrier and using coarser
powder; to de-scale the machine.
Beverage is running fast.
The powder is too coarse; or the coffee
powder is not enough; or the coffee powder
is not pressed on tightly.
Use finer powder; add more powder; press on
the power tightly.
Less coffee bubble or not.
The powder is too coarse; or the powder is
not pressed on tightly; or the powder is not
fresh, too dry.
Use the finer powder; press on the powder
tightly; use the fresh powder.
Frothing is not ideal.
Frothing aid is blocked; or the milk is not
fresh; or the milk is not cold; no water in
boiler.
Clean up frothing aid; use fresh milk; use the
cold milk; fill the boiler with water.
Too much water remains
in the filter carrier after
beverage is ready.
The powder is not tightly pressed on; or the
powder is not enough.
To press on the powder tightly; add more
powder.
No steam.
No water in boiler.
Fill the boiler with water.
Trouble Shooting
ES2010_ES3210_IM_203.indd 14
200-11-05...23:54:55