OPTIMUM
M A S C H I N E N - G E R M A N Y
Installation of step motors
3 / 08 / 2006
Page 19
Installation of step motors Adapter kit BF20 Vario; BF20L Vario ; Version 1.4.7
©
2006
GB
4
Installation of step motors
4.1
Wiring X / Y / Z axis
4.1.1
Open the lid of the step engine with a
cross slot screwdrive.
Fig.4-1: Open the lid of the step engine
4.1.2
Remove the outer isolation of the cable
and make sure that the lower isolation
of the single conductor will not be
damaged.
4.1.3
The bared part should be about 6 cm
long.
Fig.4-2: Remove outer isolation
4.1.4
Twist the fabric of the shielding.
Fig.4-3: Twist screening
screw of the step
engine
lid of the step engine
outer isolation
screening
cut outer isolation
screening
cable
