Assembly
OPTIMUM
M A S C H I N E N - G E R M A N Y
3 / 08 / 2006
Page 12
Assembly Adapter kit BF20 Vario; BF20L Vario ; Version 1.4.7
©
20
06
GB
3.3
Assembly Z axis
CAUTION!
Imperatively clamp the Z axis, otherwise, the whole milling head will slide downward as
soon as you remove the nut of the Z axis.
INFORMATION
For machines from model 2006 the fastening holes of the housing are already provided in the lid
of your machine. Therefore, it is not required to disassemble the lid with the nut from the Z axis.
3.3.1
Wind the milling head in the Z axis
completely up.
3.3.2
Clamp the Z axis with the clamping
levers!
Fig.3-14: Clamp Z axis
3.3.3
Disassemble the covering of the groove
nuts.
Fig.3-15: Disassemble covering
clamping lever
Z axis
milling head
covering groove nuts
