background image

OPTIMUM

 

 

Safety

 

 

M A S C H I N E N  -  G E R M A N Y

 

 

be duly qualified,

 

 

strictly follow this operating manual 

. In the event of improper use

 

 

there may be a risk to the staff,

 

 

there may be a risk to the drilling-milling machine and other material 

property, may affect proper operation of the drilling-milling machine.

 

 

1.5 

Safety devices  

 

Use the drilling-milling machine only with properly functioning safety devices.

 

 

Stop the drilling-milling machine immediately if there is a failure in the safety device or if it is not 
functioning for any reason.

 

 

It is your responsibility!

 

 

If a safety device has been activated or has failed, the drilling-milling machine must only be 
used when

 

 

the cause of the failure has been removed,

 

 

it has been verified that there is no resulting danger for the staff or objects.

 

 

WARNING!

 

 

If you bypass, remove or override a safety device in any other way, you are endangering 
yourself and other personnel working with the drilling-milling machine. The possible 
con-sequences are

 

 

• 

damage as a result of components or parts of components flying off at high speed,  

 

• 

contact with rotating parts,  

 

• 

fatal electrocution.  

 

The drilling-milling machine includes the following safety devices:

 

 

an EMERGENY-STOP button,

 

 

a protective cover at the drill-mill head,

 

 

a separating protective equipment on the milling spindle.

 

 

1.5.1 

EMERGENCY-STOP button  

 

The EMERGENCY-STOP button switches 
the drilling-milling machine off.

 

 

„Starting the drilling-milling machine“ 

on page 23

 

EMERGENCY-STOP

 

 

 

 

 

 

 

 

 
 

Illustr. 1-1:  EMERGENCY-STOP button

 

 

 

 

 

 

 

 

 
 

Page 8

 

Drilling-Milling machine

 

BF 30 Vario

 

Version 1.0.3

 

 

 

 

 

 

 

 

 
 

16 / 09 / 2008

 

 

 

 

 

20
08 
   

 

GB

 

 

Summary of Contents for BF 30 Vario


























































Reviews: