Operation
OPTIMUM
M A S C H I N E N - G E R M A N Y
4
Operation
4.1
Safety
Use the drilling-milling machine only under the following conditions:
The drilling-milling machine is in proper working
order. The drilling-milling machine is used as
prescribed. The operating manual is followed.
All safety devices are installed and activated.
All anomalies should be eliminated immediately. Stop the drilling-milling machine immediately in
the event of any abnormality in operation and make sure it cannot be started-up accidentally or
without authorisation.
„For your own safety during operation“ on page 11
4.2
Control and indicating elements
Cover of draw-in rod
Control panel
Digital
display
fine crossfeed of spindle
sleeve
Clamping lever of
spindle sleeve
Meter rule with scale
Selector switch for
gear-box stage
Right clamping screw
of drill-mill head
Star grip for spindle
sleeve
feed
Activation of the
fine
crossfeed
Fine crossfeed of spindle
sleeve
Crank for height adjust-
ment of drill-mill head
Illustr. 4-1: BF 30 Vario
2008
GB
Stand 16 / 09 / 2008
Version 1.0.3
BF 30 Vario
Drilling-Milling machine
Page 21
