OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
21 / 10 / 2008
Page 11
Safety Bench drill B16 H Vario ; Version 1.0.2
©
2
008
GB
1.10.2
Drill chuck protection
Adjust the protective equipment to the
correct height before you start work-
ing.
To do so, detach the clamping screw,
adjust the required height and
retighten the clamping screw.
A switch is integrated in the fixture of
the spindle protection which monitors
that the cover is closed.
INFORMATION
YOU CANNOT START THE
MACHINE IF THE DRILL CHUCK
PROTECTION IS NOT CLOSED.
Img.1-4: Drill chuck protection
1.11
Personal protective equipment
For certain work, personal protective equipments is required. Such as:
safety helmet,
protective glasses or face guard,
protective gloves,
safety shoes with steel caps,
ear protection.
Before starting work, make sure that the prescribed personal protective equipment is available
at the workplace.
CAUTION!
Dirty or eventually contaminated personal protective equipments might cause disease.
Clean your personal protective equipment
•
after each use,
•
regularly once a week.
Personal protective equipment for special work
Protect your face and your eyes: Wear a safety helmet with a face guard for every work, espe-
cially for the kind of work where your face and eyes are exposed to hazards.
Use protective gloves when lifting or handling pieces with sharp edges.
Wear safety shoes when fitting, dismantling or transporting heavy components.
clamping screw
drill chuck protection
