Operation
OPTIMUM
M A S C H I N E N - G E R M A N Y
21 / 10 / 2008
Page 24
Operation Bench drill B16 H Vario ; Version 1.0.2
©
200
8
GB
Close the protective cover.
4.5.1
Speed table
Img.4-4: Speed table
4.6
Drill depth stop
When drilling several holes
of the same depth, you can
use the drill depth stop.
Loosen the locking
screw and turn the
graduated collar until
the required drilling
depth matches with the
indicator.
Re-tighten the locking
screw.
Img.4-5: drill depth stop
4.7
Table height adjustment
Before starting your work, adjust
the required table height.
Release the clamping screw
on the drilling machine table.
CAUTION!
Fasten the drilling machine
table before releasing the
clamping screw.
Fig.4-6: Table height adjustment
Spindle
Motor
WARNING!
Danger due to drill chuck or tools flying off at high speed. Make
sure not to exceed the maximum speed of the drill chuck when set-
ting the spindle speed.
GB
locking screw
drill depth stop
scale
Clamping screw
Drilling machine
table
