OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
21 / 10 / 2008
Page 9
Safety Bench drill B16 H Vario ; Version 1.0.2
©
2
008
GB
1.7
Safety check
Check the bench drill at least once per shift. Inform the person responsible immediately of any
defect or change in the operation function.
Check all safety devices
at the beginning of each shift (with the machine stopped),
once a week (with the machine in operation),
after every maintenance and repair work.
Check that the prohibition, warning and information labels as well as the markings on the bench
drill
are legible (clean them, if necessary),
are complete.
INFORMATION
Use the following overview to organise the inspections.
General inspection
Item
Inspection
OK
Protective cover
Mounted, securely tightened and not damaged
Signs, markings
Installed and legible
Date:
Inspector (signature):
Functional test
Item
Inspection
OK
EMERGENCY-STOP-
push button
Once the emergency stop button is activated, the bench
drill should be switched off.
stop position switch
protective cover
V-belts
The bench drill must not switch on, if the protective cover
of the pulleys is opened.
drill chuck protection
The bench drill must only switch on when the drill chuck
protection is closed.
Date:
Inspector (signature):
