OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
21 / 10 / 2008
Page 17
Assembly Bench drill B16 H Vario ; Version 1.0.2
©
2
008
GB
3
Assembly
3.1
Delivery volume
Please check immediately that nothing had been damaged during transportation and that all
components are complete. Compare the delivery volume to the attached packing list.
3.2
Transport
WARNING!
Machine parts which fall off forklift trucks or other transport vehicles could cause very
serious or even fatal injuries. Follow the instructions and information on the box:
•
centres of gravity
•
suspension points
•
weights
•
means of transport to be used
•
prescribed shipping position
WARNING!
Use of unstable lifting and load suspension gear that breaks under load can cause very
serious injuries or even death.
Check that the lifting and load suspension gear has sufficient load capacity and is in per-
fect condition. Observe the rules for preventing accidents issued by your association for
the prevention of occupational accidents and safety in the workplace or other inspection
authorities.
Hold the loads properly. Never walk under suspended loads!
3.3
Storage
ATTENTION!
Improper storage may cause important parts to be damaged or destroyed.
Store packed or unpacked parts only under the following ambient conditions.
„Environmental conditions“ on page 15
Consult Optimum Maschinen Germany GmbH if the bench drill and accessories have to be
stored for a period of over three months or under different external conditions than those given
here.
3.4
Installation and assembly
3.4.1
Assembly of stand and tripod
WARNING!
Danger of crushing when grouping, assembling and mounting the machine components.
INFORMATION
In order to mount the bench drill you need an Allan key and the hexagon socket screws which
are included in the delivery volume.
