Operation
Version 1.0.5 - 2020-12-09
37
Translation of original instruction
TX4414
EN
T
X
4414
_GB
_4.
fm
4.9
Feed
CAUTION!
The faster the rotation of the lathe chuck, the higher the speed of the bed slide.
ATTENTION!
Only adjust gear settings when the lathe is being completely stopped.
The selector levers are used to set the feed or the pitch required for the thread-cutting. Select
the required feed direction (3). The thread table and feed table (4) are located above the selec-
tion levers.
7
6
4
5
6
3
2
Primary reduction gearing (2)
Selector lever (5)
Turning
Module thread
D.P thread
Selector lever (6)
Whitworth - W
Metric - M
Withworth
Module
D. Pitch
Metric
5
7
6
2
