OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.1.3 dated 2016-7-5
Page 37
Original operating instructions
BF46 Vario | BF46TC
GB
Clean the seat in the spindle / quill.
Clean the taper of your tool.
Insert the tool in the spindle / quill.
Img.4-9:
Installation tool
Clamp the tool fixture by actuating the pressure switch "Clamping" on the control panel. The
fixture will be drawn into the spindle. Press the push button switch until the tool is securely
clamped.
ATTENTION!
Img.4-10: Installation tool
Make sure that the tool seat is correctly positioned (ISO 40).
The tool clamping system must not be activated when the machine is operated.
4.11.2 Unfitting
Release the tool by actuating the switch "Release“. The fixture comes out of the spindle.
Press the push button switch until the tool is completely detached.
Img.4-11: Extraction tool
Push button "CLAMPING“
Push button "RELEAS-
ING"
