OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.1.3 dated 2016-7-5
Page 19
Original operating instructions
BF46 Vario | BF46TC
GB
3
Unpacking and connecting
INFORMATION
The drilling-milling machine is delivered pre-assembled.
3.1
Scope of delivery
Check immediately upon delivery of the drilling-milling machine if there are any transport dam-
ages or loosened fastening screws.
Compare the scope of delivery with the packing list.
3.2
Transport
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the
forklift truck or from the transport vehicle. Follow the instructions and information on
the transport case.
WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death. Check that the lifting and load suspension gear has
sufficient load capacity and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other competent supervisory authority, responsible for your
company.
Fasten the loads properly.
Never walk under suspended loads!
Centres of gravity
Load suspension points
(Marking of the positions for the
load suspension gear)
Prescribed transportation position
(Marking of the top surface)
Means of transport to be used
Weights
