OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.1.3 dated 2016-7-5
Page 49
Original operating instructions
BF46 Vario | BF46TC
GB
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
5.3
Repair
Request for a service technician of the company Optimum Maschinen Germany GmbH for all
repairs.
If the repairs are carried out by qualified technical staff, they must follow the indications given in
these operating instructions.
The company Optimum Maschinen Germany GmbH does not take responsibility nor does it
guarantee for damages and failures resulting of non-observance of this operating manual.
For repairs only use
faultless and suitable tools
only original parts or parts from series expressly authorised by Optimum Maschinen Ger-
many GmbH.
As required
V-ledges
Readjusting
Z axis:
Img.5-6: Column and mill head
Proceed as described under "Readjusting X and Y axis".
Interval
Where?
What?
How?
Regulating screw V-ledge
Z-axis top
Regulating screw V-ledge
Z-axis bottom
