INITIAL ASSEMBLY
12
!
1.5 A
TTACHING
F
RONT
W
HEEL
Tools: Sturdy scissors, safety goggles
STEP 1:
Wear safety goggles.
This step is safer
with two people.
One person should maintain
weight
on
the
front
handlebars so as to slightly
depress the front suspension.
The other cuts the large cable-
tie on the front fork. To
prevent injury, place hand
over the cable-tie as shown.
STEP 2:
Remove red spacer from the
front brake caliper—it is
positioned between the brake
pads. Also remove the front
skewer from its packaging.
STEP 3:
If your front fork has a
20mm axle, please skip to step
7. See the included fork
manual for more information.
Insert skewer through the
front axle as shown. One
spring goes on each side of
the axle with the smaller end
inwards. The quick-release
lever should be on the brake
side of the wheel.
