OPERATING YOUR OPTIBIKE
27
CHARGING YOUR BATTERY
STEP 1
The charger can be set to
operate with an input of 115
or 230 volts. Set the charger
to the correct voltage by
moving the inset switch on
the side of the charger.
STEP 2
Place the bike and charger in a
warm dry and safe setting.
Ambient temperature should
be in the range of 0
C to 45
C
(32
F to 113
F). Be sure to
position the bike so that it is
well secured and will not fall.
STEP 3
Make sure that the main
power switch is pushed
forward as shown.
STEP 4
Align
the
small
charger
connector with the bike’s
charger
port
and
insert
charger connector.
STEP 5
Plug the charger into the wall
outlet and turn the charger
on.
STEP 6
Turn the headlight body
power switch to the ON
position.
STEP 7
The red LEDs on the charger
should glow, indicating that it
is on and functional. This
charger LED will glow yellow
to indicate charging and green
to indicate completion of a
charge cycle.
The display LEDs on the
headlight body should cycle
from left to right, indicating a
charge in process. If a charge
is not initiated and the bike is
cool, turn of the charger and
wait 15 seconds; turn charger
on. LEDs will stop cycling
when charging is complete.