INITIAL ASSEMBLY
15
!
1.6 A
TTACHING
R
EAR
F
ENDER
Tools: Bicycle multi-tool and/or torque wrench.
STEP 1:
Remove the four bolts and
washers from the fender
mounts below the seat post
clamp.
STEP 2:
Place rear fender on back of
the seat tube as shown. Align
the four boltholes as closely
as possible.
STEP 3:
Place the four bolts with
washers
through
the
mounting holes in the fender
and hand-tighten into the
frame.
STEP 4:
Using included multi-tool,
tighten each bolt a few turns
until all four are equally tight.
While
tightening
the
bolts, hold the fender straight
and directly over the rear
wheel. This will ensure proper
alignment.
Do not over-tighten
the fender bolts.
The fender may
break or crack under excessive
force.
