2
2.
Important Safety Warning
Before using the inverter, please read all instructions and cautionary
markings on the unit and this manual. Store the manual in a place where
it can be accessed to easily.
This manual is for qualified personnel. The tasks described in this manual should
be performed by qualified personnel only.
General Precaution:
WARNING!
Before installing and using this inverter, read all instructions and cautionary
markings on the inverter and all appropriate sections of this guide.
WARNING!
Normally grounded conductors may be ungrounded and energized when a
ground fault is indicated.
WARNING!
This inverter is heavy. It should be lifted by at least two persons.
CAUTION!
Authorized service personnel should reduce the risk of electrical shock by
disconnecting AC, DC and battery power from the inverter before attempting any
maintenance, cleaning or working on any circuits connected to the inverter. Turning off
controls will not reduce this risk. Internal capacitors can remain charging for 5 minutes
after disconnecting all sources of power.
CAUTION!
Do not disassemble this inverter by yourself. It contains no user-serviceable
parts. Attempting to service this inverter by yourself may cause a risk of electrical shock
or fire and will void the warranty from the manufacturer.
CAUTION!
To avoid a risk of fire and electric shock, make sure that existing wiring is in
good condition and that the wire is not undersized. Do not operate the Inverter with
damaged or substandard wiring.
Conventions used:
WARNING!
Warnings identify conditions or practices that could result in personal
injury;
CAUTION!
Caution identify conditions or practices that could result in damaged to the
unit or other connected equipment.
Summary of Contents for Sp4000 Premium
