32
16.
Operation
16-1. Interface
This display is operated by four buttons as shown in the left
diagram.
NOTICE:
To accurately monitor and calculate the energy
generation, please calibrate the timer of this unit via software
every month. For the detailed calibration, please check the user
manual of bundled software.
16-2. LCD Information Definition
Display
Function
Indicates AC input voltage or frequency.
Vac: voltage; Hz: frequency
Indicates AC output power, voltage, frequency, or load
percentage.
kVA: apparent power; kW: active power,
Vac: Voltage; %: Load percentage; Hz: frequency
Indicates PV input voltage or power.
Volt: voltage; kW: power; P1: PV input 1; P2: PV input 2
Indicates battery voltage or percentage.
Volt: voltage; %: percentage
Indicates charging current to battery or discharging current
from battery.
Indicates that the warning occurs.
Indicates that the fault occurs.
Indicates fault code or warning code.
Indicates date and time, or the date and time users set for
querying energy generation.
Real-time operation
status
Section
16-5
describes
all operation conditions
when the inverter is set
up
in
“Grid-tie with
backup (I)” mode.
Summary of Contents for Sp4000 Premium
