background image

INST No. INE-459-0P2CE

                                                                                                                                                           

Ver. 1.11

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Request to the operator of the thermometer

 

This instruction manual describes the maintenance of the thermometer, too.

 

Keep this instruction manual with the thermometer. 
If you have unclear points or need technical assistance, please contact your sales agent 

of Optex. 

     

Notices

 

1. The information in this manual is subject to change without notice and does not represent 

     

a commitment on the part of 

Optex.

 

2. No part of this manual may be reproduced or transmitted in any form or by any means, electronic 

or mechanical, including photocopying and recording, for any purpose other than the purchaser's 
personal use without permission of 

Optex.

 

3. 

Optex

 shall not be liable for any operation results.

 

 

Please read this instruction manual for using the thermometer correctly and safely.

PORTABLE 

NON-CONTACT THERMOMETER 

THERMO-HUNTER 

Model: VF-3000 

Always keep this instruction manual with this thermometer. 

Please be sure to deliver this instruction manual to a person who 
uses this thermometer. 

 

Request and notices

 

 

Summary of Contents for THERMO-HUNTER VF-3000

























Reviews: