Optex THERMO-HUNTER VF-3000, Instruction Manual

Page: 16 / 24

INST No.INE-459-0P2CE Ver. 1.11
- 12 -
Sub
marker
Sub
marker
The thermometer provides a function of storing measured data (temperature measured by the
thermometer and the emissivity rate). The data storage number is from 1 to 100. When
ENT
key is
pressed, the measured data is stored.
6.1 Data storage mode
• Press
MEM
key in the hold mode in the standard measurement mode or continuous measurement
mode (Ref: [5.1 Standard measurement mode], [5.2 Continuous measurement mode]) to move to
the data storage mode. The " " mark under the main marker "
MEM
" will light and "
NO
" will
be displayed in the sub marker. Also, the data storage number "
1
" will be displayed in the sub
display for the initial data storage. When measured data have been already stored in any data
storage number, the "
next number
" to the last data storage number will be displayed.
• Press
MEAS
key for about 1 second to measure. The measurement is depended on the
measurement mode (Ref: [5.1 Standard measurement mode], [5.2 Continuous measurement
mode]).
6. Temperature data storage.
*
Make sure to press any keys until you hear an audible beep.
Tb CONT MEM PEAK
MEAS HOLD AL AH
C
F
MAX AVE ε
r
MIN TC NO
Tb CONT MEM PEAK
MEAS HOLD AL AH
C
F
MAX AVE ε
r
MIN TC NO
Main
marker
Main
display
Sub
display
Tb CONT MEM PEAK
MEAS HOLD AL AH
C
F
MAX AVE ε
r
MIN TC NO
(Initial data storage)
Tb CONT MEM PEAK
MEAS HOLD AL AH
C
F
MAX AVE ε
r
MIN TC NO
Main
marker
Main
display
Sub
display
(In case of data stored up to No. 99 last time)
• In case that the measured data have been stored in the data storage mode last
time, the next number to the last data storage number will be displayed in the sub
display. (For the above example, the number "100" will be displayed when the
measured data have been stored up to the number 99.)
Reference
● Data storage in the standard measurement mode: In the measurement by keeping
MEAS
key pressed (with the status marker "
MEAS
" lit) or in the temporary
measurement stop (with the status marker "
HOLD
" lit), by pressing
ENT
key,
the measured data (the measured temperature and the setting emissivity rate) will
be stored. The sub display will display "
Str
" instantly when the measured data is
stored, and then will display the next data storage number.
● Data storage in the continuous measurement mode: In the measurement by
keeping
MEAS
key pressed (on the condition that the " " mark under the
main marker "
CONT
" and the status marker "
MEAS
" light together), by
pressing
ENT
key, the measured data (the measured temperature and the setting
emissivity rate) will be stored. The sub display will display "
Str
" instantly when
the measured data is stored, and then will display the next data storage number.
Reference