background image

ENGLISH

FRANÇAIS

DEUTSCH

IT

ALIANO

ESP

AÑOL

PORTUGUÊS

EN-2

Warning

Caution

This symbol indicates prohibition. The specific prohibited action is provided in and/or around the figure.

This symbol requires an action or gives an instruction.

Do not use the product for purposes other than the detection of moving objects such as people and vehicles.

Do not use the product to activate a shutter, etc., which may cause an accident.

Do not exceed the voltage or current rating specifi ed for any of the terminals during installation, doing so 

may cause fire or damage to the devices.

Never attempt to disassemble or repair the product. It may cause fire or damage to the devices.

Do not pour water over the product with a bucket, hose, etc. The water may enter, which may cause damage 

to the devices.

Clean and check the product periodically for safe use. If any problem is found, do not attempt to use the 

product as it is and have the product repaired by a professional engineer or electrician.

Do not touch the unit base or power terminals of the product with a wet hand (do not touch when the 

product is wet with rain, etc.). It may cause electric shock.

Warning

Caution

Failure to follow the instructions provided with this indication and improper handling may cause 

death or serious injury.

Failure to follow the instructions provided with this indication and improper handling may cause 

injury and/or property damage.

1

INTRODUCTION

1-1

BEFORE YOUR OPERATION

 Read this instruction carefully prior to installation.

 After reading, store this instruction carefully in an easily accessible place for reference.

 This instruction uses the following warning indications for correct use of the product, harm to you or other people 

and damage to your assets, which are described below. Be sure to understand the description before reading the 

rest of this instruction.

Summary of Contents for AX-100TF















Reviews: