- 31 -
Using the internal web pages
To enter and save a preset camera position
1.
Enter the preset number by clicking the corresponding number button.
2.
Adjust the camera’s position for the desired view.
3.
When satisfied with the position, click
SET
.
(The SET button is not available to users with Viewer rights.)
To call a preset camera position
1.
Enter the preset number by clicking the corresponding number button.
2.
Click
GO
.
To erase a preset camera position
1.
Call the preset (see above).
2.
Press
Clear
.
3.
If desired, override the preset with a new preset position.
Zoom out
Zoom in
Focus far
Focus near
Iris open
Iris close
Click arrows to pan and
tilt the camera (at fixed
speed)
Figure 7.8b
PTZ Control panel
Click ball to pan and tilt
the camera (point of
clicking determines
pan/tilt speed)
