- 12 -
Installation
4.4. Connector Pin Assignments
Correctly connecting the + and - inputs and outputs on the C-54 E green mini Combicon
connector to the inputs and outputs on other equipment such as cameras, for example,
requires special attention!
Do NOT reverse the wires.
Make sure you connect the ‘plus’ signal lines on the
codec to the like ‘plus’ signal lines on the other device, and likewise for the
‘negative’ to ‘negative’ signals.
Do not forget to connect ground!
Top to bottom:
Pin 1 RS-485-4w/422 in + RS-485-2w in/out +
Pin 2 RS-485-4w/422 in -
RS-485-2w in/out -
Pin 3 RS-485-4w/422 out +
Pin 4 RS-485-4w/422 out -
Pin 5 GND
GND
No.
Pin
1
TX+
2
TX-
3
RX+
6
RX-
Table 4.1 Pin assignments of the mini Combicon data
connector.
Table 4.2 Ethernet connector
pin assignment
