Oppo udp-203, User Manual

Page: 81 / 98

76
Useful Notes

In order to prolong the life of your player, it is recommended that you wait at least 30 seconds
before you power it on after switching it off.

Remove discs and turn the power off after operation.

Some functions of the player may not be applicable to certain discs.

Some discs with special features may not be fully supported by the player. This is not a malfunction
of the unit.

In the case of player malfunction, please turn it off, wait for 30 seconds and turn it back on. If the
problem still exists, please follow the troubleshooting instructions or contact an OPPO service
center.
Troubleshooting
Use this chart to resolve general operational problems. If there are any problems that you cannot resolve,
please contact your OPPO service center.
Symptom Possible Cause Solution
Reference
Page
No sound
Audio cable is not properly
connected Check audio cable, and then reconnect if
necessary.
12
–16
Mute is activated Press the MUTE button to cancel the mute. 25
Volume is too low
Press the VOL+ button to increase the volume to
100.
25
SACD is played and the
audio connection is coaxial
or optical digital audio
This is not supported due to copyright restrictions
of SACD. Please use the analog or HDMI audio
output. Alternatively, you may set SACD Priority
to CD mode and the player will play the CD layer.
16, 57
DVD-Audio is played and
the audio connection is
coaxial or optical digital
audio This is not supported due to copyright restrictions
of DVD-Audio. Please use the analog or HDMI
audio output. Alternatively, you may switch to the
DVD-Video playback mode.
16, 57
No picture
Video cable is not properly
connected
Check video cable; reconnect if necessary. 12
–14
TV input is not correctly
selected
Select the input to which the player is connected.
“Pure Audio” mode
engaged
Press the PURE button to cancel this mode. 35
Video output format is not
supported by the TV Select a proper output resolution that is
supported by your TV.
54