Oppo udp-203, User Manual

Page: 62 / 98

S E T U P M E N U O P T I O N S
57
only support 2 channels of audio with high sample rate (up to 192kHz), or 8 channels of
audio with standard sample rate (up to 48kHz). If you play high resolution audio content at
the 480p/576p resolution, you may get reduced audio resolution, incomplete audio
channels, or even no audio/video output at all. Choosing a higher output resolution such as
720p or above allows enough bandwidth for all high sample rate audio channels.
3. S/PDIF Output: Allows you to set the audio format and the upper sample rate limit for
coaxial/optical (S/PDIF) digital outputs. The upper sample rate limit is used to decide whether the
player shall down-sample audio (the player does not up-sample audio to higher sample rates).

48k LPCM
– Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format, and sets
the maximum sample rate to 48kHz. This is supported by most receivers/amplifiers.

96k LPCM
– Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format and sets
the maximum sample rate to 96kHz. It can result in better audio quality but ensure the
receiver/amplifier can support it.

192k LPCM
– Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format and
sets the maximum sample rate to192kHz. It can result in better audio quality but ensure the
receiver/amplifier can support it.

Bitstream (default)
– Passes audio as compressed bit-stream format to the receiver/amplifier.
Choose this setting if your receiver/amplifier is capable of decoding Dolby Digital and/or DTS.
NOTE

Due to copyright restrictions and bandwidth limitations, SACD audio cannot be sent through
the coaxial/optical audio output, and the high resolution audio on DVD-Audio and Blu-ray
discs will be sent out at reduced resolution. Details can be found on page 16.
4. DVD-Audio Mode: Select which portion of a DVD-Audio disc to play.

DVD-Audio (default)
– Play the DVD-Audio portion of the disc with high-resolution audio.

DVD-Video
– Play the DVD-Video portion of the disc with Dolby Digital or DTS audio.
5. SACD Priority: Select which audio layer to play for SACD (Super Audio CD).

Multi-Channel (default)
– Play the high resolution multi-channel surround audio layer

Stereo
– Play the high resolution 2-channel stereo audio layer

CD Mode
– Play the CD layer of a hybrid SACD disc
6. SACD Output : Allows you to select the audio output format for SACD playback.

Auto (default)
–
The player checks with the device connected to the HDMI output to
automatically determine which audio format (DSD or PCM) to use for SACD playback.

PCM
– SACD data is converted into multi-channel, high-resolution PCM data. The converted
PCM data is then output through HDMI or the internal DAC (Digital to Analog Converter) for
the analog audio output ports. If you use a receiver that supports HDMI v1.1 to listen to
SACD, please select this option. You may also want to select this option if you prefer the
sound quality of the DSD-to-PCM conversion.