Oppo udp-203, User Manual

Page: 21 / 98

C O M M O N C O N N E C T I O N M E T H O D S
16
Connecting to an A/V Receiver or Amplifier via S/PDIF (Coaxial /
Optical)

Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF
optical digital audio cable to connect one of the digital audio outputs to the corresponding input
terminal on your A/V receiver. For detailed setup of coaxial/optical signals, refer to page 57.
NOTE

Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio cannot be sent through
the coaxial or optical digital audio output. A reduced resolution version of the same audio
track will be output instead. To listen to high resolution audio formats in their best quality,
please use the HDMI connection if you have a receiver that handles HDMI audio (see page
12) or use the multi-channel analog outputs if you do not (see page 15).

Due to copyright restrictions, SACD audio cannot be sent through the coaxial or optical
digital audio output. To listen to SACDs, please use the HDMI or analog audio connections.

Due to copyright restrictions and bandwidth limitations, full resolution audio from DVD-Audio
discs cannot be sent through the coaxial or optical digital audio output. To listen to DVD-
Audio in full resolution, please use the HDMI or analog audio connections.